Home Forums Everything about the Baby Tricopter Baby Tri Build (24-12-2017), 6S build

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #40506
    Kevin_Erik
    Moderator

    Started working on a Baby-Tri with 6S but initially it will run 4S to proof-test the build.
    After which I intend to swap the motors for Emax LS2207-1900kv or T-Motor F80-1900kv.
    The big difference here being weight, with the Emax at just over 30 grams and the F80’s right around 40ish.

    Currently Have the following in-hand
    -Emax LS2207-2550kv Brushless motors (3)

    Currently have the following on order
    -Baby Tri frame.
    -Aikon AK32 35A 6S BLHeli_32 ESC (3)
    -Frsky R-XSR receiver
    -RDQ Smoke-Stopper
    -Matek F4 AIO Flight Controller OSD
    -Matek VTX

    Here are the Ecal’s for the stock, 4S and 6S builds
    (Stock Baby-Tri)

    (Modified 4S Baby-Tri)

    (Modified 6S Baby-Tri)

    #40507
    MadPoet
    Participant

    Hi Kevin,

    I’ve been looking into those Matek boards myself. What hex target do you use for those w/ regards to triflight?

    #40511
    Kevin_Erik
    Moderator

    Dont know what I’ll use for the Matek yet… I know it can be addressed just like any other board so it just requires some experimentation.

    #40594
    Tom.Robson
    Participant

    This is what I’m working on while I’m waiting for my “Baby Tricopter”, no build pic.s just completed tri:
    https://www.facebook.com/thomas.robson.1238/media_set?set=a.1392405427537660.1073741866.100003046483109&type=3&uploaded=7

    Yep seven (7) hours difference.

    Attachments:
Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Everything about the Baby Tricopter’ is closed to new topics and replies.