Home Forums Everything about the Tricopter V4 Beeping when battery connected

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #39941
    Milton
    Participant

    I am having a battle with setting up my tricopter.
    When I connect the battery whilst connected to betaflight the buzzer goes constantly.
    This is before any modes are set including putting the buzzer on a switch.
    I have been battling this problem on and off since the integrated f3fc came out and have tried two different boards with same problem??
    What am I doing wrong?

    #39947
    Siclair
    Participant

    If the beep is constant it could be shorted. Check the soldering.
    If it beeps in a rhythm it’s probably a failsafe alarm. Make sure the transmitter is turned on.

    #39951
    Milton
    Participant

    Figured out what was causing the beeping…..the tail servo!
    I disconnected the beeper and continued with the setup, when I got to the tail tune servo didn’t move.
    Tried arming and input yaw, servo didn’t move.
    Took the servo off and tested it, didn’t move!
    Plugged the flight battery in and beeping had stopped.
    So frustrating given how much time I’ve spent troubleshooting and trawling the internet looking for an answer.

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Everything about the Tricopter V4’ is closed to new topics and replies.