Home Forums Everything about the Tricopter LR Connecting servo to kakute FC

This topic contains 2 replies, has 3 voices, and was last updated by  flacke 3 months, 1 week ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #62805


    At witch port i have to wire the Servo signal ?
    in the drescriptrion from rcexplore i have to connect on the LED Port and remap in Betaflight.
    I use Dronin and the servo dosend work.
    i hope someone has an solution for me



    If you’re using dRonin there’s nothing you have to do in BetaFlight to make the servo work. If you connect the signal to LED, it will work in dRonin (obvious assumption that you have the power and ground and feedback also connected as explained in the setup video. You will need to set it up as described in the setup video, though.



    Is the feedback necessary for the servo? I’d like to use the Rssi for Crossfire.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.