F3FC Betaflight target

[lauka]

PR created at: https://github.com/betaflight/betaflight/pull/1079

Help test the HEX, attached here.

Attachments:

1. betaflight_3.0.0_RCEXPLORERF3.hex_.zip

[LitterBug]

I’ll give it a flash.

Cheers!
LitterBug

[herpaderp]

Cool!
Will this work for the F3FC Racing as well? Or does it need a separate target?

[lauka]

It should work on both F3FCs

[LitterBug]

What RC was this .hex based on? Flashed with no problems. Hope to give it a fly tonight.

Cheers!
LitterBug

[lauka]

I dont remember, it was the latest at the time of writing. The PR is now merged in.

[JRach]

I have a dumb question but does this mean that the triflight code has been merged into betaflight?

[lauka]

Nope, Triflight is still based on cleanflight.

[RCExplorer – David]

Thank you for this Lauka. Really appreciate it 🙂

[fly4props]

Hi Guys,
I bought a baby tri this past week and I must say thanks Dave for the fast shiping! I spent 2 days watching your build video.One of the best I have seen…..you should get an Oscar for that!!

I am running the triflight_F3FC.hex with the default PID’s and Im not sure if its my build but the tri feels mushy to me. I played with the rates, tried adjusting the pids,nothing seems to work. Im still getting some side to side slushyness in fff , rolls feels like im landing in a pillows. I noticed on throttle punches the tri moves side to side at low throttle. I have a feeling when in fff the servo is moving side to side and that is where im getting the “bounce” I have done the tail tuning a few times. I also noticed when in a hover the servo is pitched to the right, should it be straight ?

I was wondering if the betaflight target has the tail tune and or is it difficult to set the tri to run betaflight? I noticed Lauka flight videos are so smooth and would like my tri to be just as smooth.

Thanks in advance

[Author]

Posts