Poll for Triflight features on F3 and F1 boards

[lauka]

Betaflight 3.2 has many added features which makes it challenging to rebase Triflight on it. The flash space on F1 and F3 boards is simply not enough.

Please respond to this poll by selecting three features you value the most: http://www.polljunkie.com/poll/osqjbc/triflight-rebase-on-betaflight-32

I will use this information when deciding on what features to drop to make it compile for the smaller targets.

I don’t yet know how much we would need to strip away.

[lauka]

Here you can view the results btw: http://www.polljunkie.com/poll/pbcinr/triflight-rebase-on-betaflight-32/view

[Kevin_Erik]

Voted

Can we add the category “Free beer” ?

[MadPoet]

Thank you Lauka, you rock!

[RCExplorer – David]

Voted.
Posting this on the first page in hope we get more input.

[BLeeK]

Will there be a full(er) version of the 3.2 Triflight for F4 &/or F7 boards or will this cover all?
Thank you for your hard work! 🙂
*voted*

[AgentLAL]

I have voted. And David, could you eventually release a tricopter board that is an F4 instead of an F3? and possibly an OSD? Thanks!

[AgentLAL]

Oh—oops I picked a lot of features…Whoops!

[mcstan]

I voted too.. but im using F4 these days 😛

[Kevin_Erik]

@Mcstan

Curious to know how your setup with F4 and if your capable of using an LiPo greater than 4S?

[lauka]

@BLeeK: Yes there will. There restrictions will only apply for the F1&F3 boards.

[RCExplorer – David]

@mcstan: What F4 board are you using? Does everything work ok with it? Feedback and such?

[Kevin_Erik]

David…

Saw this a while back and thought that this would be a great candidate FC-AOI.

Note: Not pluggin for Josh but its relevant and to the point.

Kevin

[lauka]

I started working on the rebase this weekend. I got most of the work done, still having some issues with the tail motor control.

Fortunately the RCEXPLORERF3 and BETAFLIGHTF3 targets compiled without issues. The NAZE didn’t, I will see if I can make it compile by removing stuff. Betaflight has already removed most of it :).

[mcstan]

Hi all

@david I’m using the Holybro Kakute F4 AIO from banggood I picked this one for the old RSSI pin and the gyro being soft mount, and having everything on one board is a big plus for me… I killed too many F3FC mostly due to my bad soldering 😛 and OSD killing the UATRS over my time lol.

so far its done the right speed from my servo when I had the F3FC my servo speed was 375 and with this control its the same so I’m sure it’s doing it right. I have not done try using Dshot because I have old school ESC and limited funds right now so I can’t upgrade.

Holybro-Kakute-F4-AIO-Flight-Controller 1.2

@Lauka I flashed the board to beta 3 .. I still had to set the motors to the right pins for motor 3 needs to be on A02
and your right about the EXTI for the feedback.. I have no idea why this worked in beta 2.. I set it to RSSI and then it tune Right

30/12/17 just notice that holybro have just released version 2 of there FC I’m not sure if it will work they removed motor pins for 5 and 6

[Author]

Posts