Home Forums Everything about the Tricopter V4 Servo problems

Tagged: , , ,

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #13608
    Stefan
    Participant

    Hi,

    I have a Q about the Servo setup with KK2-Stevies Firmware..
    When I test the servo with servotester it works fine and moves greate on the copter.

    But when a hock it up to the KK2 and spin up the servo don’t move as mutch at both sides on the yaw. It IS centerd!

    Also one other Question,, What axis (control on radio) should the servo work on? rudder or elivator.

    Thanks in advance.

    #13615
    Chadwick
    Participant

    It is standard to have the servo on the rudder control on your transmitter.

    As for your servo movement could it be because of stick scaling on the kk board? How much less is it moving than with the tester?

    #13617
    Stefan
    Participant

    With the servotester and all mouted on the copter the servo moves fine and as mutch at both sides.
    With KK2 it moves just halv the way on the left side and fine(full) on the right side.

    I will look into Stick scaling setting and see if it helps.

    Thanks!

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Everything about the Tricopter V4’ is closed to new topics and replies.