Tricopter V3 Setup – RCExplorer

This topic has 1 reply, 2 voices, and was last updated 7 years, 10 months ago by villalji.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
14 November, 2016 at 02:50 #34826
Minh
Participant
Hi,
I bought a Tricopter V3 frame w/ PCB (Naze32) one year ago. But i dont have time to build until now, the old pre-configured tutorial (locate: http://rcexplorer.se/product/naze32-tri-frame/) no longer exist, so i dont know what to do ?

Can i follow the new-tutorial setup for Tricopter V4 (F3FC) firmware (locate: http://rcexplorer.se/forums/topic/triflight-setup-guide/) with the new CLI Dump (attached) i’ve found (locate: http://rcexplorer.se/forums/topic/throttlemotor-behavior-on-rc-explorer-naze32r6-triflight/) ?

Or, follow this (http://rcexplorer.se/product/minitricopter-kit/):
flash the triflight_0_6_RC1_NAZE.hex in (http://rcexplorer.se/product/minitricopter-kit/)
and dont care about the CLI dump ?

Thanks for your helping.
Attachments:
1. Tricopter-Cleanflight-Triflight-CLI-Dump-11-9-2016-2.txt
16 November, 2016 at 21:52 #34911

villalji
Participant

Hi Minh,
Easy solution, Just check David’s youtube channel, you will find the v3 video build there, as well as the naze32 configuration video:

Tricopter v3 build: https://youtu.be/kvZGA6dJQJs

Naze32 tricopter setup: https://youtu.be/xY1EJpPZgSc

Don’t forget to subscribe to his channel!!
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

The forum ‘Everything about the Tricopter V4’ is closed to new topics and replies.