14 November, 2016 at 02:41 #34822
I bought a Tricopter V3 frame w/ PCB (Naze32) one year ago. But i dont have time to build until now, the old pre-configured tutorial (locate: http://rcexplorer.se/product/naze32-tri-frame/) no longer exist, so i dont know what to do ?
Can i follow the new-tutorial setup for Tricopter V4 (F3FC) firmware (locate: http://rcexplorer.se/forums/topic/triflight-setup-guide/) with the new CLI Dump (attached) i’ve found (locate: http://rcexplorer.se/forums/topic/throttlemotor-behavior-on-rc-explorer-naze32r6-triflight/) ?
Thanks for your helping.18 November, 2016 at 04:41 #34963
I’m in the same position except I tried following the various bits parts and pieces I gathered from this forum and had it working until I tried to update the firmware and now I have a brick that I can’t recover even after trying all the “solutions” posted.
It appears I flashed it with the wrong firmware, but honestly it is no longer clear on this site or in the tool, which firmware is correct!
Any help would be appreciated!18 November, 2016 at 09:01 #34964
The guide for unbricking the old NAZE Frame is here:
Guide: Unbricking the NAZE32 frame.
Then, if you are looking for any version of the firmware that should run on this, I believe you are safe to go with https://github.com/lkaino/Triflight/releases/download/0.5/triflight_0_5_NAZE.hex (from https://github.com/lkaino/Triflight/releases). The https://github.com/lkaino/Triflight/releases/download/0.5/triflight_0_5_F3FC.hex version is for the newer F3FC frame.
Good luck.23 November, 2016 at 10:24 #35070
thank you, guys.
this weekend i’ll try to recover my drone he he
You must be logged in to reply to this topic.