Forum Replies Created
-
AuthorPosts
-
adamcooney1Participant
It’s “feature -triflight” note the “-”
I’m just trying to pick-up some of @jhlein’s light stuff.adamcooney1ParticipantThanks @danisaez,
I printed out a couple of sets for my two LRs. Well designed and they fit equally as well.Thanks,
Adam
29 October, 2019 at 23:17 in reply to: Impossible Tilt Tail Mech vs. RC Explorer- Who you got? #64087adamcooney1ParticipantWell, that’s all the convincing I needed.
If anyone needs me I’ll be in the basement printing and cutting zip ties…..
adamcooney1ParticipantAnd it grows…… Thanks to @Kevin_Erik.
These are a blast. Now with a cat safe option.
Frame was fresh off of the printer. No post processing yet.Attachments:
adamcooney1ParticipantRemixed version with prop guards and a camera mount:
adamcooney1Participant@Kevin_Erik
Just used PLA for the frame. I look forward to your next revision. I am also tweaking a version to include integrated prop guards for easier flying/crashing indoors. I will definitely post my build as well as attribute you as the source. My e-mail is [email protected] if you need to send me anything directly. I’m just learning Fusion 360 and I will start printing in different materials as soon as I feel comfortable with PLA. I’m not happy with the component alignment and I need to do some filling of some gaps. I think it was you who suggested Fusion 360 in the first place.I really appreciate the work that You, @LitterBug, @lauka and @jihlein (and I suppose David too) have devoted to this small dark corner of the multi-rotor hobby. When I am struggling with a FC pinout, DRonin quirk or a GCS compatibility issue I come here like its a support group for people with the Tricopter virus. I’ve got a really bad case…….
https://rotorbuilds.com/build/20506
Adam
adamcooney1ParticipantThanks @Kevin_Erik. I printed your 3″ frame and built a Micro Tri. Love it. Thanks for your hard work on the design. Flew this one LOS and I will be adding a camera soon. Flies great with stock setup using BF 3.2.2.
I’m really going to miss this place, I’ve learned so much from you guys….. SadAttachments:
adamcooney1ParticipantThanks Litterbug,
I followed most of your wiring instructions since I had an old DTFC lying around. First one with the DJI FPV system on board.Adam
Attachments:
adamcooney1Participantjihlein,
You are a genius! Never skip a step!!! I sometimes have skipped the servo speed test (Davids video refers to the ServoCal mode as the Tri-flight mode which kinda confused me) but that was it. As soon as I performed the test it was solved. Thanks much jihlein. If you ever get to Denver I’m buying you a beer.Adam
adamcooney1ParticipantYour tail motor problem is exactly the same as mine. You’re saying just running tail tune cured you problem? I’m not sure mine would get airborne long enough to run the Servo Calc. But that sporadic running a rumbling sound is the same issue I have.
17 September, 2019 at 02:12 in reply to: Where in the world is your RCExplorer Copter? Link to map #63647adamcooney1ParticipantSeveral in Thornton, CO
-
AuthorPosts