Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • in reply to: F3FC user manual? #32049
    Daniel_Karlsson
    Participant

    I had that beeping earlier trying to hook up LEDs and MinimOSD (UART) but eventually got rid of the LEDs since they didn’t work reliable (sometime they lit up but usually started to fluctuate later). They both worked separately but when both where connected I could get beeping, random errors and OSD>LED

    I.e. for me it was due to some kind of communication error and didn’t appear if I removed the uart-connections.

    in reply to: Tail tune not working #31998
    Daniel_Karlsson
    Participant

    No fail-safe, its the arm/disarm switch. If you disarm you will get the save-beeps if you have a beeper

    in reply to: F3FC reports extreme current draw #31835
    Daniel_Karlsson
    Participant

    I also tried to connect the minimosd to UART2 and the minimosd-2nd stage to the TX BEC and failed + got the wierd beeping when connected via USB. It works ok on UART1. Had even more problems trying to power LEDs via UART at the same time as powering minimosd…

    Could the two-stage approach used by minimosd be the cause? Have anyone tried to solder the bridges to remove the need for the 2nd stage?

    See wiring examples here
    http://ardupilot.org/copter/docs/common-minim-osd-quick-installation-guide.html

    in reply to: Tail drift #31280
    Daniel_Karlsson
    Participant

    Hi, I have just built my first tri-copter (experienced heli and quad builder) and have the same problem as Matteo and others: A slight drift that is very clear when going for-/backward.

    Everything is stock w F3FC

Viewing 4 posts - 1 through 4 (of 4 total)