Forum Replies Created

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • in reply to: Triflight 0.7 Beta 1 #37347
    fpvlog
    Participant

    Hi guys.

    Here is a video of my baby tricopter on Triflight 0.7

    I rougly edited it to show the worst things that are happening. It is very hard to control. Prop wash is massive and yaw axis is twitching a lot.

    Let me know what settings a should change.

    Thanks

    in reply to: New Build: Baby Tricopter #2 #37325
    fpvlog
    Participant

    So do you prefer Triflight 0.7 or Dronin so far?

    Cheers 😉

    in reply to: Triflight 0.7 Beta 1 #37324
    fpvlog
    Participant

    Hey guys!

    I’m so happy the 0.7 beta is out!! Thanks lauka!!

    I tried it on my baby tri and it does a weird yaw input on turns sometimes… maybe the pids are made to carry a gopro and I didn’t have it for tests. It’s dark now so I can’t try anymore.

    Tomorrow I’ll post a video of what it does.

    The tail tuning went very well and very fast! I was impressed!

    Anyway, it feels better than before but it’s still a bit weird during turns… maybe I want it to fly like a quad too much. I don’t know…

    in reply to: Baby tricopter yaws after punch outs #36829
    fpvlog
    Participant

    Ok so I tried increasing tri_motor_acc_yaw_correction from 10 to 15

    It changed nothing. After a punch out when i cut the throttle it sometimes does a full 360 (so scary!)

    How much should I increase it?

    in reply to: Baby tricopter yaws after punch outs #36808
    fpvlog
    Participant

    Same problem here.

    i hope it could be solved. I dont like this!

    in reply to: Servo feedback speed, post your results #36807
    fpvlog
    Participant

    mine is 398… is it normal?

    in reply to: YAW adjustments #36806
    fpvlog
    Participant

    Same problem here.

    Everything works pretty good except that after a punch the Tri is yawing to the left when the thottle goes down.

    i tried idle up switch (as airmode is no good), it helped a lot (it used to do almost a full 360 degrees rotation, now it’s only 30 to 45 degrees) but the problem is still here.

    If you find a solution, please let me know!

    Cheers

    in reply to: Triflight 0.6 RC1 #36483
    fpvlog
    Participant

    Ok thanks.
    This leeds to another question then.
    Is serial passthrough possible with cleanflit/triflight to configure micro MinimOSD when connected tp UART 1 or 3 as it is possible in betaflight and very very handy…?

    in reply to: Triflight 0.6 RC1 #36479
    fpvlog
    Participant

    Hey guys. I’m new to tricopters and I would like to know what is the best option at the moment firmware wise.
    I’ve seen people talking about dronin, triflight, cleanflight, betaflight etc…
    I’d love to use betaflight like in my others quads as it is what I am used to and I reconn BF is just the best nowadays but what about in flight tail tuning and everything (servo feedback…)?

    Cheers

Viewing 9 posts - 1 through 9 (of 9 total)