Forum Replies Created

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • in reply to: Baby with Kakute F4 V2 #60150
    kaly__
    Participant

    Oooops. It’s working well with Triflight 0.7 beta 3 Kakute F4 … Only the motors had to be remapping. 🙂

    In dRonin set the servo (2200 us / 1700 / 1200) and working , too. 🙂

    Thanks for the help Kevin_Erik, jihlein !

    in reply to: Baby with Kakute F4 V2 #60149
    kaly__
    Participant

    Previously I used triflight for the old controller (rc3explorer). It worked very well. But as I can see there is no .hex file for the new controller (https://github.com/lkaino/Triflight/releases) , it is only for the Kakute F4 fc, not Kakute F4 V2. Or would that work properly? I did not try… yet. 🙂

    in reply to: Motor spin direction #39893
    kaly__
    Participant

    Solved. 🙂 Soldered, swap the two side cable on the ESC… Not nice, but it works.

    in reply to: Motor spin direction #39889
    kaly__
    Participant

    I was try to use, the BLHeli configurator in Chrome, but not working. 🙁 Connecting, read, and waiting.. waiting…

    Trying to use the BLHeliSuite32 with WINE (I use OSX) , but this give error:

    Attachments:
    in reply to: Where in the world is your RCExplorer Copter? Link to map #39883
    kaly__
    Participant

    Nagykanizsa, Hungary

    in reply to: Motor spin direction #39882
    kaly__
    Participant

    – the props install : left-CCW, tail-CCW , right – CW . But now I test with all props CCW, and it’s flying. (Only test few minute, hovering at the garden) (I think the right motor has a wrong direction … )
    – Yes, the Betaflight select tricopter
    – Yes, I try the betaflight prop directions.
    – No… Right motor spin the opposite direction, CCW like the other motors… 🙁 (If I swap the ESC with the two side wires it can help? )
    – I’ve seen several times and I see that everything is good (maybe)
    – Yes, tricopter respond . I flew with her, only with a bad propeller direction. 🙂

    Kaly

Viewing 6 posts - 1 through 6 (of 6 total)