Forum Replies Created
-
AuthorPosts
-
LoneWolf-HDParticipant
Hi!
Thank you very much for your answers!!!
I will try it like in Davids video.
I only need better weather for my first flight…
21 September, 2015 at 15:11 in reply to: Our Tricopter was the chief character in the best LOVE-Movie #20008LoneWolf-HDParticipantI like it! Thank you!!!
LoneWolf-HDParticipantHello!
Thanks David!!! The shipping was verry fast within 3 days!
Konversion Kit No 089 arrived in Austria.
Cant wait for the building video…
LoneWolf-HDParticipantHello Minh!
I use a FrSky Tarinis plus. Its my first digital TX and i am also new to it. It works on mode 2 (throttle is left). At the moment i only programmed 3 switches. One for “armed/disarmed”, one for the “flightmodes” (acro/ angel/horizon) and one for the “lost model alarm”. I hope i never need it…
LoneWolf-HDParticipantHello!
It works on channel 4 🙂
LoneWolf-HDParticipantThanks for the answers!!!
I bought a FrSKY voltage sensor. Cool stuff!!!
But i have one question about how to connect the receiver to the naze32 tricopter frame:
I use a x8r receiver and made an inverter cable. On the stand alone boards, the signal wire goes to pin4. Look here: X8R to Naze32
How should i connect it to the naze32 tricopter frame?!? On receiver input 1???
Thanks!!!
LoneWolf-HDParticipant@ Terje: Sorry for german. My english is not so good, but i will try to translate it.
The link of Patrick is good. But you can only connect the S-Bus to the Naze32. It is the same like an inverter cable. But how can i connect the S-Port for the telemetry to the Naze?!?
LoneWolf-HDParticipant@Patrick:
Damit bekomm ich nur den S-Bus an das Naze32. Ist dasselbe wie mit einer Inverterschaltung in der Zuleitung zum Board. Nur wie bekomm ich den S-Port für die Telemtrie an den Receiver?LoneWolf-HDParticipantThank you for your answer Terje!
My Taranis is a 2015 Model and i live in Austria. The new European Law for it only allows X-receivers (ETSI 1.8.1). The D4R-II does not work with this firmware 🙁
When i downgrade the Taranis (is not allowed), the D4R-II will work, but the X8R wont because (has the ETSI 1.8.1 also)…
It looks like no telemetry for me. Only RSSI and the receiver bat state…
LoneWolf-HDParticipantHello!
I will use a FRSKY X8R receiver for my “NAZE32 Full Tricopter Frame”. Does the telemetry from the board work with the receiver so i can see it on my tarains?
I know that i need an inverter cable for the sbus connection to the naze.
Does SmartPort and Naze32 work???
Thanks!
LoneWolf-HDParticipant@Terje:
Wow! Great tricopter!!!
I ordered the V3 kit and i will learn to fly with the copter. But the next is definately a mini tricopter!!!
Greatings from Austria!
Andi
-
AuthorPosts