[pamera]

Hi guys,

Today I’ve upgraded to Betaflight 4.1.0 and I also upgraded the ESCs to BlHeli 32.7 and I’ve tried the new RPM filtering. I’ve made a short (5min) flight to test it and it seemed to be pretty stable. I gonna go fly tomorrow with FPV and I gonna report back. If someone wants to try out I fallowed this tutorial. I also attached my diff file.

Attachments:

1. betaflight-4.1.0-tricopter.txt

[pamera]

Hi

By default the OSD disabled and it doesn’t have UI but you can enable it from System tab.
I’ve attached 2 image one fore enable it and one where you can change the content of it. You also can move the items by adjusting the X and Y coordinates. e.g. if I want to move the ArmedFlag to right I have to increase the X[4] value or decrease to move to the left same for the other axis if you increase the Y[4] it will go down and vice versa.

Attachments:

1. 

   osd-enable.png
   

2. 

   osd-settings.png
   

[pamera]

It stopped working during the flight because i lost yaw control. I use 270hz like in the setup video. The tail rotate freely. I had dozen flight before without any issue. Maybe after the dronin update i tuned poorly and the servo is overheated and burned. :/ I gonna test the servo with a servo tester and if it doesn’t work i gonna replace it.

Edit:
Regarding to this post maybe we should use this servo with 250hz instead of 270?

[pamera]

Hi Guys,

I’ve updated my tricopter with the latest firmware based on this topic after I did the auto tune and the servo cal. I had two fly wit the it but on the second fly my servo stopped working and the tricopter started to spin. I could land it and i ended with one damaged prop so nothing horrible happened but my servo still not working. It was my first crash and it wasn’t a big crash. Anybody had similar problem?

[pamera]

Hi,
I ordered it too few days ago. Do you have any info when it will be back?

[Author]

Posts