Forum Replies Created

Viewing 15 posts - 1 through 15 (of 41 total)
  • Author
    Posts
  • in reply to: Post your FPV videos! #28684
    RCJim
    Participant

    Here’s a video I put together on the beautiful island of Kauai. The Golden Hour

    in reply to: Video editing #28683
    RCJim
    Participant

    I’ve been using a program called Sony Movie Studio for a while now with relatively no problems. It’s a cheaper version of Sony Vegas. I would never use Windows Movie Maker way too limiting, but what can you ask for for free.

    in reply to: Mini Tricopter vs Tri v3.5 #27278
    RCJim
    Participant

    I know they are pretty much two different animals but can you use the mini like a full?

    in reply to: Oscillations during yaw right #27275
    RCJim
    Participant

    .

    in reply to: Naze 32 Tail Setup #15826
    RCJim
    Participant

    It says that’s an unknown command.

    in reply to: Naze 32 Tail Setup #15818
    RCJim
    Participant

    How do you make the servo stop moving untill the board is armed?

    in reply to: Naze 32 Tail Setup #15800
    RCJim
    Participant

    Figured it out my self. Under the servo tab under Change Direction in TX to Match I had channel 1 checked off. Unchecked it and it stopped.

    in reply to: Naze 32 Tail Setup #15798
    RCJim
    Participant

    Yes the roll stick is controlling the servo and making it roll the tricopter, yet yaw is controlling the servo as well. On the channel map all the sticks are controlling their proper channels, so I don’t know why it’s happening. When you move the roll stick the servo turns in the same direction as the roll. With the yaw the servo tuns in the proper direction for the yaw.

    in reply to: Naze 32 Tail Setup #15796
    RCJim
    Participant

    I can try that but I don’t think that’s the problem. What it is is that when I move the yaw it moves the servo correctly but when I move the roll stick it moves the aileron channel as well as the yaw. Should it do this, it didn’t with the kk2.

    in reply to: Tail Servo not Working #15477
    RCJim
    Participant

    Could connecting all the positives from the esc’s to the naze 32 have caused the servo to fry?

    in reply to: Tail Servo not Working #15418
    RCJim
    Participant

    Tried testing with receiver doesn’t work either.

    in reply to: Motor Acting Funny #14555
    RCJim
    Participant

    Yep that’s what it was. Remembered your post about that before. I actually tried the e-clips from the fakes I accidentally smoked and it sounds better. Who would have thought.

    in reply to: Motor Acting Funny #14548
    RCJim
    Participant

    Yeah, just tried resoldering it and it seems to be fixed but now the motor is kinda loud. Don’t know if that’s because of it getting warm. Could the bearings be wrecked?

    in reply to: Where to Buy SunnySky Motors #14314
    RCJim
    Participant

    Most likely, even the boxes are different. Yours are a V series, mine an X so it’s a little different than mine as far as the mount screws and prop adapter but the rest is the same.

    in reply to: Where to Buy SunnySky Motors #14310
    RCJim
    Participant

    Just got some of the same motors from BuddyRC and there are a few things that are different with them. The ones from BuddyRC say Made in China not From China, the font of the lettering on the front is different, it has a totally different clip on the bottom, and even the barring looks different. Also the ones from BuddyRC are in sealed plastic, whereas the Ebay ones were in those awful zip bags.

Viewing 15 posts - 1 through 15 (of 41 total)