[stoffen89]

Awsome! Do u have link to a video ?? ?

[stoffen89]

@litterbug when u enable softserial where do u connect the thing u want to connect ?

Trying to connect:
UART 1 -Sbus
UART 2 -smartport
UART 3 -osd
And then I want to connect smart audio from Tbs unify! 🙂

[stoffen89]

Ok so I flashed it with triflight 0.7 beta 2 and the problem went away.
Did the in-flight tunning and it was OK but I need to change the pids some:)

happy flying !

[stoffen89]

Yes! 🙂

[stoffen89]

Thanks for the replay David!
I had not tested that yet, but I resolded all the cables but that was not fixing the problem.
I will test ur advice !:)

[stoffen89]

Hi thezoq2!
Är du sugen på att köpa? Jag har en jag kan sälja ! 🙂

[email protected]

[stoffen89]

My god!
I have the same error still.
I cant get in to blhelisuit:(
Tryed everything now!
# right com port
# plugd in the lipo
# cleanflight in background, not connected.
# flashed the board several times.
# tryed another computer
# resolder and checked the esc
# downloaded Zadig and all that stuff I did the first time

Mini Tricopter and all is defualt with Davids setup.
(Aikon sefm 30A)

Do anybody knows what to do? 🙂

[stoffen89]

Hi!
Did u get it working?
I got the same problem :/

[stoffen89]

Yes the blue putty-substance is for balance the motors!:)

[stoffen89]

Thanks!
Will check it out 🙂

[stoffen89]

Thanks !

[stoffen89]

Hi villalji !
thanks for writing back!!

I’ve tested all the pads and I’ve got the voltage of them.
but I get no volts from the uarten/pinheadern.
so I have probably fried the board!
I resoldered all the pads and also the buzzer but no change.

So I ordered a new board and I will see if I might be able to acquire new resistor from David and fix it so I have a spare!

My receiver takes 4-10V.
I will look into the separate pololu 5v, Thanks for the tip!

[stoffen89]

–

Attachments:

1. 

   IMG_0256-rotated.jpg
   

[stoffen89]

,

Attachments:

1. 

   IMG_0267.jpg
   

[stoffen89]

.

Attachments:

1. 

   IMG_0246-rotated.jpg
   

[Author]

Posts