10x10mm 270mm Bicopter Arm [Second-rate]

    $ 3.00

    Out of stock

    Category:

    Description

    These arms are of second-rate quality!

    Please note that these arms have not passed our quality control in regards to aesthetic qualities. They may be severely scratched, have a very uneven finish, be clogged on the inside, have sharp edges and/or other faults. The edges may be square or of the more rounded variety. They are, however, mechanically sound. The price is set taking this into account.

    Please note that this is a legacy product. This means that once the current stock has run out, it’s unlikely that this product will be re-stocked. Product information will then act as a reference.

    These woven carbon fiber square tube arms are incredibly stiff, strong and lightweight. The torsion (twisting) strength is unparalleled which results in a crisp and precise flying experience, even with high power setups. Unlike extruded carbon fiber arms, these arms can take abuse without cracking. They are also lighter, have more room inside to run wires (if they are not clogged) and are stiffer in all aspects.

    The bicopter arm, much like the original 10*10 mm Carbon Fiber Arm, but with the correct length for the bicopter, and without screw holes.

    Specifications:

    • Material: 3K Carbon Fiber twill weave
    • Length: 270mm (approximately)
    • Outside dimensions: 10x10mm
    • Inside dimensions: 8x8mm (may vary, or be clogged)
    • Wall thickness: 1mm (may vary)
    • Weight: ~16.5 grams

    Price includes one bicopter arm.

    Most other carbon fiber square tubes on the market are made using a process called extrusion. Basically, at one end there is a huge container of carbon fiber. These fibers are mixed with resin and then gets pushed through a die that has the shape of the tube you want to produce. This process is quick and inexpensive. However as the carbon fibers only run along the length of the tube and are not interwoven. This means that torsion strength and durability is low. These tubes can’t withstand compression nor twisting motion without cracking. Once cracked the tubes lose most of their torsion strength and get so soft that they twist during flight, often causing catastrophic in air failures (don’t ask me how I know). They are also difficult to drill as the force required to cut the carbon strands using a normal drill bit is really close to the compression strength of the tube. More often than not you end up with a cracked tube. Tired of changing arms after a small crash, or even a hard landing, I set out on a quest to find a better alternative. Square aluminium profiles worked but they were heavy and tended to bend in a crash. Would work great on less powerful setups and during the learning stages of flying, but it lacks the fine control and precision achieved with stiff and high torsion strength booms. It’s also difficult to hide the wiring.

    So I decided to find a manufacturer and make my own woven carbon fiber square tubes. These arms are made using a technique called bladder moulding. This means that you start out with a woven carbon fiber cloth, which you wet with epoxy and then place into the bottom part of a two-part mould. Multiple layers are laid down at a 45° offset. A balloon is placed in the middle and the carbon fiber cloth wrapped around the balloon. Then the top part of the mould is placed on top and screwed down. The balloon is then inflated at very high pressure pressing the carbon fiber out against the mould. The mould is then placed in a heated chamber to activate the epoxy resin. The pressure in the balloon is maintained for the whole curing time. This process creates incredible strong and nice looking parts. The carbon fiber cloth has fibers woven together at 90° angles and the different layers are placed at a 45° offset to achieve the highest possible torsion, compression and tensile strength.

    The wall thickness is 1mm, which leaves 8x8mm of space inside the tube. This makes running wires inside a breeze. Since these arms use less material than its extruded counterpart, they are 33% lighter. That is 8 grams lighter on a 325mm long arm.

    Since each boom is hand laid the wall thickness may vary a bit, meaning that the inside dimensions might differ a bit. The outside dimensions, however, are always the same. Also being hand made there might be small imperfections in the finish of the part.

    Additional information

    Weight 18 g

    Reviews

    There are no reviews yet.

    Be the first to review “10x10mm 270mm Bicopter Arm [Second-rate]”