Here is a step by step build/setup video of the RCExplorer Bicopter. I hope you’ll find it useful. Post a comment if you have any questions or if there is something I missed in there.
The Bicopter parts have arrived and the kits will ship out soon!
3 thoughts on “Bicopter build video is now live!”
Leave a Reply
You must be logged in to post a comment.
😀
Hello, I assembled my motor swivel on the bench and it was free with no play, when I tie locked down it was quite hard to swivel. What I found was the bottom of the mount that attached to the carbon finer square tube was not flat and when it was tie locked down it cause it to bind.
What you need to do is make the bottom flat first on the bench, then free it up so it swivels freely and then when you tie lock it to the carbon fiber tube it will still turn freely
Made a few corrections to upper post
Hello, I assembled my motor swivel on the bench and it was free with no play, when I tie locked it down it was quite hard to swivel. What I found was the bottom of the mount that attached to the carbon fiber square tube was not flat and when it was tie locked down it cause it to bind.
What you need to do is make the bottom flat first on the bench, then free it up so it swivels freely and then when you tie lock it to the carbon fiber tube it will still turn freely
Jerry